Latest Music Software News
- Nassen RaX'n'TraX 1.4.9 2 Sep 2010, 4:35 pm
Nassen has updated RaX'n'TraX to version 1.4.9. - Kuassa Amplifikation One Update 2 Sep 2010, 4:33 pm
Kuassa has updated Amplifikation One to v1.1. - Plektron Guitar Amp Update 2 Sep 2010, 4:32 pm
Plektron has announced an update to its Guitar Amp amplifier simulator and multi-fx plug-in for Windows. - Hidenori Matsuoka Guitar Kit 2 Sep 2010, 4:31 pm
Hidenori Matsuoka has announced the release of Guitar Kit, a tool for searching guitar chord fingering patterns on the iPhone, iPod touch, and iPad. - Peavey AmpKit, AmpKit+ & AmpKit LiNK 2 Sep 2010, 4:22 pm
Peavey Electronics and Agile Partners have announced that the AmpKit and AmpKit+ Apps are available now on the Apple iTunes App Store. - Ohm Force Studio Teaser 4 2 Sep 2010, 2:31 pm
Part 4 of a 5 part series demonstrating Ohm's Studio- an online collaborative sequencer. - AudioSpillage updates DrumSpillage to v1.1 2 Sep 2010, 7:54 am
2nd September 2010: AudioSpillage has updated its DrumSpillage percussion synth plug-in to version 1.1. New Features: Improved support for automation recording and editing. Choke groups (12 groups ava. […] - Nassen updates RaX'n'TraX to v1.4.9 2 Sep 2010, 7:49 am
2nd September 2010: Nassen has updated RaX'n'TraX to version 1.4.9. Changes since v1.4.1: Drag "Key"-event to MONO panel. Extended window to draw Notes/Velocities in MONO panel (double-click on Note/V. […] - Sonic Reality releases Neil Peart Drums Vol. 1: The Kit 2 Sep 2010, 7:35 am
2nd September 2010: Sonic Reality has announced the release of Neil Peart Drums Vol. 1: The Kit, a music software recreation of the massive DW drum kit of legendary drummer of Rush, Neil Peart. It com. […] - HyperSynth releases SIDizer 2 Sep 2010, 7:30 am
2nd September 2010: HyperSynth has announced the release of SIDizer, a new emulation of the legendary SID chip in the form of a modern software synthesizer plug-in. Using circuit modeling technology,. […]
0
Follows Audio-In to make a CC envelope.
0
This is a collection of cross-platform midi VST plugins
midi16CCRouter - Changes up to 16 CCs to 16 other CCs.
midi2qwerty16 - Use MIDI to trigger fake keystrokes to the focused window.
midiAudioToCC - Converts audio amplitude to CC messages.
midiCCModulator - Use one CC to modulate another CC (or note velocity) in various ways: add/subtract/multiply/etc, plus logic gates (AND, NAND, XNOR, etc).
midiCCReset - Remembers CC values and sends them out again at selected times.
midiCCStepper - Quantize CC events by value or in time.
midiCCToggle - For changing momentary CC buttons into toggles.
midiChannelize - Transforms everything to the selected channel.
midiChs_noGUI - Channel filter/changer like energyXT1 “MIDI chs” component.
midiConverter2 - Change and convert between CC, Channel Pressure, Poly Aftertouch, Program Change, Pitch Bend, NRPN/RPN, and Note On/Off messages in various ways.
midiDelay - Delay notes and/or CCs with feedback.
midiDuplicateBlocker - Remembers all MIDI message values it gets on each channel, and blocks any repeated values until a different value is received.
midiExactDelay - Simple delay (no dry signal, no feedback) with flexible and precise delay time.
midiFingered - Selectively sends standard portamento on/off CC messages to emulate “fingered portamento” for synths that don’t have it.
midiForceToKey - Enforces a scale, and transposes within the scale (optionally based on MIDI notes on a selected channel).
midiForceToRange - Transposes notes by octave into the selected range.
midiInvertNotes - “Mirrors” notes centered around the selected note.
midiKeySplit - Simple keyboard splitter.
midiNotchFilter - Isolate, remove, or channelize specific MIDI messages.
midiNotesToCC - Converts note number and velocity to CC messages.
midiNoteToggle - Notes (optionally within a selected range and/or channel) are toggled… play a note once to turn it on, play it again to turn it off.
midiNRPNConverter - Converts between NRPN/RPN and CC messages, with 16 conversion slots.
midiPolyphony - For spreading polyphony across MIDI channels, i.e. if you play 4 notes, each one will go to a different channel. Polyphony per channel can be set from 1 to 16 notes for more flexibility. You can also use it to convert polyphonic input to monophonic output.
midiProbability - Add probability-based effects to incoming MIDI events, optionally synced to host timeline.
midiProgramChange - Send Program Change and/or Bank Select messages.
midiSimpleLFO - One CC LFO with some “simple” options.
midiSostenuto - Like a piano sostenuto pedal, but for MIDI notes instead of piano dampers.
midiStrum - Sequentially delays notes of an input chord to simulate strumming.
midiStuckNoteKiller - Sends note-off messages to end hanging notes when the host stops (for hosts that don’t do this themselves).
midiSwing - Delays and/or offsets velocity of and applies probability to notes (and optionally also CCs) at every other step of a selected note value.
midiVelocityScaler - Scale/reverse/offset velocity of input notes (Note On and/or Note Off).
0
this is a simple device to convert the amplitude characteristics of arbitrary audio input signals into MIDI CC. It works in stereo, so the Left and Right channels can be output to different controllers.
0
KTDrumTrigger is a VST plugin with custom editor that triggers MIDI notes based on the sound level of the incoming audio stream in different frequency bands. It allows you to “detect” occurrences of percussive sounds in an audio stream and send out a MIDI event whenever that happens.
It works like this: incoming (mono) audio is split up into different frequency bands using three tweakable filters. The signal in each of these bands is sent through an envelope follower. When the envelope reaches a specified threshold level, a MIDI note on message is generated. The trigger module has some built-in hysteresis and minimum inter onset time settings to avoid fast successive triggers due to noise on the envelope curves. Visual feedback of the filter and trigger settings is available….
0
This plugin analyses the incoming audio signal to extract its envelope which is converted into MIDI continuous controler.
0
Designed to take an audio signals velocity/loudness and turn it into a continuous controller value of 0-127
0
Old drum pad to MIDI plugin. Takes a piezo type drum pad and converts it to a MIDI note and velocity value
0
A mono guitar/audio triggered synth for bass tones
0
Mono guitar/audio triggered synth
0
A simple mono audio to midi plugin
0
An update to DrumDirection. Takes a piezo type drum pad and converts it to a MIDI note and velocity value. Also comes in versions with internal velocity split wave layers. KVR developer challenge 3 entry
0
Older space sounding mono guitar/audio triggered synth
0
Mono guitar/audio triggered synth with two virtual analog oscillators
0
Mono guitar/audio triggered synth with two virtual analog oscillators - Same as S2VA with one oscillator that loads .sf2 (sound fonts). Comes with example files and .fxb
0
Mono guitar/audio triggered synth with two virtual analog oscillators - Same as S2VA with one oscillator that loads up to four velocity split .wav files (wave files). Comes with example files and .fxb
0
Trigger wave files with an audio source
0
Another ‘Older space sounding mono guitar/audio triggered synth’
